Electrical Engineering Technician (ANZSCO 312312): TRA Assessment or CDR?

Electrical Engineering Technician (ANZSCO 312312) is one of the most confused codes in engineering migration. Many people search for a “CDR for 312312”, but this occupation is assessed by Trades Recognition Australia, not Engineers Australia. This guide explains the correct pathway, when a CDR is the right choice instead, and how to pick the code that fits your work. Last updated: November 2026.

Short answer

ANZSCO 312312 Electrical Engineering Technician is assessed by Trades Recognition Australia (TRA), so a CDR to Engineers Australia is not the pathway for this code. If your work is mainly electrical drawings, consider 312311; if you hold an electrical engineering degree and do design work, consider 233311 or 233914. Those codes use the Engineers Australia CDR pathway.

What is ANZSCO 312312 Electrical Engineering Technician?

An Electrical Engineering Technician performs technical functions in research, design, manufacture, installation, testing, maintenance and repair of electrical equipment and systems, usually supporting electrical engineers.

ItemDetail
OccupationElectrical Engineering Technician
ANZSCO code312312
Alternative titleElectrical Engineering Technical Officer
SpecialisationsElectrical Engineering Laboratory Technician; Electrical Instrument Technician
Unit group3123 Electrical Engineering Draftspersons and Technicians
Skill level2
Assessing authorityTrades Recognition Australia (TRA)
Typical qualificationAdvanced Diploma in electrical engineering or comparable training, plus relevant experience

Typical duties under this code include:

  • Testing and commissioning electrical equipment and systems
  • Assisting engineers with design and data collection
  • Calibrating instruments and protection devices
  • Fault finding and preventive maintenance planning
  • Supervising installation to drawings and specifications
  • Preparing test reports and technical records
  • Laboratory testing of electrical components
  • Estimating materials and preparing work orders

Who assesses ANZSCO 312312: TRA or Engineers Australia?

For skilled migration, Trades Recognition Australia (TRA) is the assessing authority for Electrical Engineering Technician (312312). Engineers Australia assesses the neighbouring code Electrical Engineering Draftsperson (312311) and Electrical Engineer (233311), but not 312312.

Check before you pay. If a provider offers to prepare a CDR for code 312312, ask which assessing authority it will go to. A CDR sent to Engineers Australia must nominate an occupation that Engineers Australia assesses.

312312 compared with related codes

OccupationMain focusAssessing authorityPathway
Electrical Engineering Technician (312312)Testing, commissioning, maintenance, technical supportTrades Recognition AustraliaTRA skills assessment
Electrical Engineering Draftsperson (312311)Electrical drawings and documentationEngineers AustraliaEngineering Associate CDR
Electrical Engineer (233311)Design, analysis and engineering decisionsEngineers AustraliaProfessional Engineer CDR
Engineering Technologist (233914)Applying established engineering technologyEngineers AustraliaEngineering Technologist CDR

When a CDR is the right choice instead of 312312

A CDR to Engineers Australia can be the better route when your qualification and projects match an Engineers Australia occupation:

  • Your work is mainly drawings: single line diagrams, layouts and cable schedules may fit Electrical Engineering Draftsperson (312311).
  • You hold an electrical engineering degree: design calculations, protection studies or system design may fit Electrical Engineer (233311).
  • You apply established technology at a senior level: some roles may fit Engineering Technologist (233914).
  • Your work is hands-on testing and maintenance: 312312 through TRA is usually the honest fit.

Choosing a code only because it seems easier can lead to a refusal or a mismatch later in the visa process. Pick the code that matches what you actually did.

Australian visa pathways for Electrical Engineering Technicians

VisaTypeNotes
Subclass 189Skilled IndependentPoints-tested, no sponsor needed
Subclass 190Skilled NominatedRequires state or territory nomination
Subclass 491Skilled Work Regional (Provisional)State nomination or eligible family sponsor
Subclass 482Skills in Demand (employer sponsored)Requires an approved employer sponsor
Subclass 186Employer Nomination SchemePermanent employer-sponsored visa

As at August 2026, Electrical Engineering Technician (312312) was listed on the MLTSSL and CSOL. Lists change, so check the Department of Home Affairs website and speak to a registered migration agent for visa advice.

How Engineer CDR helps electrical technicians

Free code check

Send your CV and we will tell you whether 312312, 312311, 233311 or 233914 matches your work.

CDR review for EA codes

If an Engineers Australia occupation fits, we review, edit and check the CDR you write.

Competency mapping

We check every Engineering Associate or Professional Engineer element is evidenced by paragraph.

Plagiarism and consistency check

A similarity scan and a check that dates and employers match your documents.

Frequently asked questions

Who assesses Electrical Engineering Technicians (ANZSCO 312312) for migration?

Trades Recognition Australia (TRA) is the assessing authority for ANZSCO 312312, not Engineers Australia. A CDR is not used for this occupation’s migration skills assessment.

Can I submit a CDR to Engineers Australia as an Electrical Engineering Technician?

Not under code 312312. If your work and qualification fit an occupation Engineers Australia assesses, such as Electrical Engineering Draftsperson (312311), Electrical Engineer (233311) or Engineering Technologist (233914), you can apply through the CDR pathway for that occupation.

Is Electrical Engineering Technician on the skilled occupation list?

As at August 2026, Electrical Engineering Technician (312312) was listed on the MLTSSL and the Core Skills Occupation List. Check the Department of Home Affairs website before you apply.

What is the difference between 312312 and 312311?

312312 Electrical Engineering Technician focuses on testing, commissioning, installation support and maintenance and is assessed by TRA. 312311 Electrical Engineering Draftsperson focuses on electrical drawings and documentation and is assessed by Engineers Australia.

Should I choose 312312 or 233311 Electrical Engineer?

If you hold a four-year electrical engineering degree and your projects include design calculations and analysis, Electrical Engineer (233311) through Engineers Australia may fit. If your role is mainly hands-on technical work, 312312 through TRA may fit.

Can Engineer CDR help me with a TRA application?

We focus on Engineers Australia CDRs. We can help you decide whether an Engineers Australia occupation fits your work, and review your CDR if it does. For TRA, follow TRA’s official guidelines or speak to a registered migration agent.

Why do some websites offer a CDR for 312312?

Some sites list every engineering-related code. For migration, the assessing authority for 312312 is TRA, so check the official occupation list before paying for a CDR under this code.

Not sure which code fits you?

Email info@engineercdr.com with your CV and a short list of your main projects. We will tell you honestly whether an Engineers Australia CDR is the right route.

Get a free occupation code check

Find out whether 312312, 312311 or 233311 fits your work before you spend money on an assessment.

Sources: Department of Home Affairs: Skilled occupation list; Trades Recognition Australia; Engineers Australia: Migration skills assessment. Assessing authorities and lists can change, so always check the official pages before you apply.