CDR for Electrical Engineering Draftspersons (ANZSCO 312311) is the Competency Demonstration Report that electrical drafters submit to Engineers Australia under the Engineering Associate category. Engineer CDR helps you confirm the right code, build three career episodes from your own drafting and design work, and map all 16 Engineering Associate competencies. Last updated: November 2026.
Short answer
The correct code for Electrical Engineering Draftsperson is 312311 (312312 is Electrical Engineering Technician). Engineers Australia assesses 312311 as an Engineering Associate. Without an accredited or Dublin Accord qualification, you submit a CDR: three career episodes, a summary statement mapping EA1.1–EA3.6, and a CPD list. As at August 2026, 312311 was on the MLTSSL and CSOL.
What is ANZSCO 312311 Electrical Engineering Draftsperson?
An Electrical Engineering Draftsperson prepares detailed electrical drawings, plans and documentation under the direction of engineers, applying technical knowledge of electrical systems and standards. Engineers Australia assesses this occupation as an Engineering Associate.
| Item | Detail |
|---|---|
| Occupation | Electrical Engineering Draftsperson |
| ANZSCO code | 312311 |
| Unit group | 3123 Electrical Engineering Draftspersons and Technicians |
| Skill level | 2 |
| Assessing authority | Engineers Australia (Migration Skills Assessment) |
| Assessment category | Engineering Associate |
| Typical qualification | Advanced Diploma or Associate Degree in electrical engineering or drafting |
| Related occupations | Electrical Engineering Technician (312312), Electrical Engineer (233311), Electronic Engineering Draftsperson (312411) |
Typical duties assessed under this code include:
- Single line diagrams and electrical schematics
- Power, lighting and earthing layouts
- Cable schedules, routing and tray layouts
- Switchboard and control panel general arrangements
- Applying wiring rules and design standards to drawings
- Bills of materials and equipment schedules
- As-built drawings from site mark-ups
- Coordinating drawings with mechanical and structural teams
Job titles that often fit ANZSCO 312311
- Electrical Draftsperson
- Electrical CAD Designer
- Electrical Design Drafter
- Electrical Detailer
- BIM/Revit MEP Electrical Modeller
- Substation Design Drafter
- Panel Design Draftsperson
- Electrical Documentation Officer
312311 or 312312: which code is right for you?
Many guides mix up these two codes. They sit in the same unit group but are assessed differently:
| Occupation | Main focus | Assessing authority | Choose it if |
|---|---|---|---|
| Electrical Engineering Draftsperson (312311) | Drawings, layouts, documentation | Engineers Australia (CDR possible) | Most of your work is producing and checking electrical drawings |
| Electrical Engineering Technician (312312) | Testing, installation support, maintenance | Trades Recognition Australia | Most of your work is technical testing, commissioning or maintenance |
| Electrical Engineer (233311) | Engineering design and analysis | Engineers Australia (CDR possible) | You hold an electrical engineering degree and do design calculations |
Read our guide for Electrical Engineering Technicians (312312) if your work is mainly testing and commissioning.
Who needs a CDR as an Electrical Engineering Draftsperson?
You need a CDR if your Advanced Diploma, Associate Degree or equivalent is not accredited by Engineers Australia and is not recognised under the Dublin Accord. Since 1 September 2024, Australian Advanced Diplomas and Associate Degrees must be Engineers Australia accredited to use the Australian qualification pathway.
Australian visa pathways for Electrical Engineering Draftspersons
| Visa | Type | Notes |
|---|---|---|
| Subclass 189 | Skilled Independent | Points-tested, no sponsor needed |
| Subclass 190 | Skilled Nominated | Requires state or territory nomination |
| Subclass 491 | Skilled Work Regional (Provisional) | State nomination or eligible family sponsor |
| Subclass 482 | Skills in Demand (employer sponsored) | Requires an approved employer sponsor |
| Subclass 186 | Employer Nomination Scheme | Permanent employer-sponsored visa |
| Subclass 494 | Skilled Employer Sponsored Regional | Regional employer sponsor |
As at August 2026, Electrical Engineering Draftsperson (312311) was listed on the MLTSSL and CSOL. Lists change, so always check the Department of Home Affairs website and speak to a registered migration agent for visa advice.
Engineers Australia fees, timing and English
| Item | Detail (check before you apply) |
|---|---|
| CDR assessment fee | AUD 1,034 incl. GST for 2026–27, as published in guides checked October 2026 |
| CDR + Relevant Skilled Employment Assessment | AUD 1,512.50 incl. GST |
| Fast track (optional) | AUD 396 incl. GST, added to the assessment fee |
| Time to be assigned an assessor | Generally about 15 weeks for standard applications, per Engineers Australia (not the total time to an outcome) |
| English (Engineers Australia guide, January 2026) | Tests taken on or after 7 August 2025: IELTS 6 in each band; PTE Academic Listening 47, Reading 48, Writing 51, Speaking 54; TOEFL iBT Listening 16, Reading 16, Writing 19, Speaking 19; Cambridge C1 Advanced 169 in each. LANGUAGECERT Academic, Michigan English Test and CELPIP General are also accepted. The test must be taken within 3 years before you lodge. Citizens of the UK, USA, Canada, New Zealand or Ireland with a valid passport are usually exempt. |
How Engineer CDR helps Electrical Engineering Draftspersons
Your work, your words. Engineers Australia requires career episodes and the summary statement to be your own work. We review, edit and check the CDR you write, so your technical drafting decisions come through clearly.
CDR review
A detailed review of your CV, career episodes and summary statement against the Engineering Associate standard.
Editing and feedback
Line-by-line feedback on structure, first-person voice and technical detail.
Summary statement mapping
A check that every EA competency element is evidenced with exact paragraph numbers.
Plagiarism and consistency check
A similarity scan and a check that dates, employers and projects match.
Project selection advice
Help choosing three drafting projects that show engineering judgement, not just CAD work.
Code check
We confirm whether 312311, 312312 or 233311 fits your work before you pay any fee.
CDR format for Electrical Engineering Draftspersons
| Document | What Engineers Australia expects | Tip |
|---|---|---|
| CV | Full work and education history with dates | Match project names and dates to your episodes |
| Three career episodes | 1,000 to 2,500 words each, first person, numbered paragraphs | Show how you applied wiring rules, sizing and checking, not just drawing |
| Summary statement | Maps every Engineering Associate competency element to paragraph numbers | Reference exact paragraphs, not whole episodes |
| CPD statement | Continuing professional development, in a list or table | Include AutoCAD Electrical, EPLAN, Revit MEP or wiring rules courses |
| Supporting documents | ID, qualifications, transcripts, employment evidence and English test | Check names and dates are consistent everywhere |
Name the tools and standards you really used, such as AutoCAD Electrical, EPLAN, Revit MEP or MicroStation, AS/NZS 3000 or IEC 60364, and IEC 60617 symbols. Then explain how you applied each one.
Career episode ideas for Electrical Engineering Draftspersons
- Building power and lighting layouts: applying lux levels, circuit allocation and wiring rules to drawings.
- Single line diagram for a substation or switchboard: protection devices, ratings and labelling.
- Cable schedule and routing: cable sizing inputs, tray fill and segregation checks.
- Control panel general arrangement: component layout, heat and clearance considerations.
- As-built documentation: resolving site mark-ups and updating drawings to match installation.
- BIM coordination: clash detection and resolution with mechanical and structural models.
- Solar PV or EV charger layouts: string layouts, cable runs and compliance notes.
- Diploma project: suitable for recent graduates, describing your own design drawings and checks.
Mapping the 16 Engineering Associate competencies
Your summary statement must show where each element is demonstrated, by paragraph number:
| Element | What it covers | Example evidence for electrical drafters |
|---|---|---|
| EA1.1 | Science and engineering fundamentals | Using electrical principles to check circuits and loads on drawings |
| EA1.2 | Mathematics, numerical analysis and computing | Calculations for voltage drop, cable size or lighting in support of design |
| EA1.3 | Specialist practical knowledge | Practical knowledge of wiring rules, symbols and drawing standards |
| EA1.4 | Engineering developments in your area | Keeping up with new standards, software or equipment |
| EA1.5 | Contextual factors | Considering safety, cost and installation constraints |
| EA1.6 | Scope and norms of engineering practice | Working within drawing approval and engineering sign-off rules |
| EA2.1 | Solving well-defined engineering problems | Resolving drawing conflicts or errors with established methods |
| EA2.2 | Technical tools and resources | Using CAD, EPLAN or BIM tools correctly |
| EA2.3 | Systematic synthesis and design | Producing layouts and schedules that meet the design brief |
| EA2.4 | Systematic project management | Planning drawing deliverables, revisions and deadlines |
| EA3.1 | Ethical conduct and accountability | Following procedures and reporting errors honestly |
| EA3.2 | Oral and written communication | Clear drawing notes, transmittals and meetings with engineers |
| EA3.3 | Creative and proactive approach | Suggesting a better layout, template or checking method |
| EA3.4 | Managing information | Managing drawing registers and revision control |
| EA3.5 | Managing self and professional conduct | Managing your own workload and learning |
| EA3.6 | Teamwork | Working with engineers, electricians and other drafters |
How to write a strong career episode as an electrical drafter
Each career episode should follow a clear structure with numbered paragraphs (for example 1.1, 1.2, 1.3):
- Introduction (about 100 words): dates, location, organisation and your job title.
- Background (about 200 to 500 words): the project, its objectives, the organisation structure and where your role sat.
- Personal engineering activity (about 500 to 1,500 words): what you personally did, the problems you faced, how you solved them, the calculations and methods you used and the decisions you made.
- Summary (about 50 to 100 words): the outcome and what the project shows about your competence.
- Show the technical checks behind each drawing, not just the software you used.
- Explain which standard or rule applied and how it changed your layout.
- Separate your work from the engineer who signed the design.
- Give results, such as drawings issued, errors removed or installation time saved.
Common reasons Electrical Draftsperson CDRs are rejected
- Copied or ghost-written content found by plagiarism checks
- Using “we” so your personal role is unclear
- Episodes that only describe CAD commands without engineering judgement
- Nominating 312312 when the work is drafting, or 312311 when it is testing
- Missing EA competency elements or wrong paragraph references
- Inconsistent dates, employers or project names
- Episodes outside the 1,000 to 2,500 word range
Frequently asked questions
What is the correct ANZSCO code for an Electrical Engineering Draftsperson?
The code is 312311. Code 312312 is Electrical Engineering Technician, which is a different occupation with a different assessing authority.
Who assesses Electrical Engineering Draftspersons (312311)?
Engineers Australia assesses this occupation under the Engineering Associate category. Without an accredited or Dublin Accord qualification, you usually apply through the CDR pathway.
Is Electrical Engineering Draftsperson on the skilled occupation list?
As at August 2026, Electrical Engineering Draftsperson (312311) was listed on the MLTSSL and the Core Skills Occupation List. Lists change, so check the Department of Home Affairs website before applying.
What qualification do I need for 312311?
This occupation usually needs an Advanced Diploma or Associate Degree in electrical engineering or drafting, or equivalent. Since 1 September 2024, Australian Advanced Diplomas and Associate Degrees must be accredited by Engineers Australia to use the Australian qualification pathway.
Which competencies does an Engineering Associate CDR cover?
The summary statement maps 16 Engineering Associate elements, from EA1.1 to EA3.6, covering knowledge, engineering application and professional attributes.
Can AutoCAD drawing work alone be a career episode?
Only if the episode shows engineering judgement, such as applying wiring rules, sizing cables, checking clearances or resolving design clashes. Copying mark-ups without technical input is weak evidence.
Can Engineer CDR write my CDR for me?
No. Engineers Australia requires your career episodes and summary statement to be your own work. We review, edit and check your own draft and help you map the competencies.
How much does the Engineers Australia CDR assessment cost?
Guides checked in October 2026 list AUD 1,034 including GST for a CDR assessment in 2026-27, with optional fast track at AUD 396. Confirm on the Engineers Australia website.
Get help with your Electrical Draftsperson CDR
Send us your draft or book a free consultation. Email info@engineercdr.com with your drawings experience and when you plan to apply.
Not sure if 312311 is your code?
Send us your CV and we will check the right occupation before you write a single episode.
Related services and guides
- Electrical Engineering Technicians (312312): TRA or CDR?
- CDR review, editing and plagiarism check
- Summary statement guidance
- Career episode guidance
- CDR for Naval Architects (233916)
Sources: Engineers Australia: Migration skills assessment; Engineers Australia: Prepare your Migration Skills Assessment application; Department of Home Affairs: Skilled occupation list; Visa Envoy: Engineers Australia migration skills assessment guide (fees checked October 2026). Requirements, fees and lists change, so always check the official pages before you apply.
